15436 The drive being recorded to is full. Recording has been stopped.
15437 Error trying to save the file to disk. Try freeing up some disk space and try again.
15438 Name%d
15439 MS Sans Serif
15440 Speed
15441 Position
15442 Volume
15443 Pos:
15444 Paused
15445 Unable to run the editor at this time.
15446 The file attached to the selected message has been deleted or moved to a different directory:\n\n
15447 The file attached to the selected message is not a valid .WAV file. It cannot be opened:\n\n
15448 The specified operation cannot be performed. Wait for other operations to be completed, and try again.
15449 Import Memo File
15450 Import Greeting File
15451 Import Voice File
15452 New Message
15453 Old Message
15454 second
15455 seconds
15456 MAILBOX:
15457 NEW
15458 OLD
15459 Record Memo
15460 Please enter some text.
15461 Phone
15462 Arial
15463 Receive Log
15465 Active
15467 Disconnecting...
15469 Dialing...
15470 Ringing...
15472 Connecting...
15473 Redialing...
15474 Playing...
15475 Recording...
15478 The specified line resource is already allocated.
15479 The specified device ID is invalid.
15480 The call's bearer mode cannot be changed to the specified bearer mode.
15481 All call appearances on the specified address are currently in use.
15482 The maximum number of outstanding call completions has been exceeded.
15483 The maximum number of parties for a conference has been reached.
15484 Returned when the dialable address parameter contains dialing control characters that are not processed by the service provider.
15485 There is no dial tone.
15486 Returned when the dialable address parameter contains dialing control characters that are not processed by the service provider.
15487 Returned when the dialable address parameter contains dialing control characters that are not processed by the service provider.
15488 The application requested an incompatible API version number.
15489 The application requested an invalid extension version number.
15490 The TELEPHON.INI file has been corrupted.
15491 The line is in use. The call cannot be placed at this time.
15492 The specified address is not valid.
15493 The address specified in the LINECALLPARAMS structure is not valid.
15494 The specified address mode is not valid.
15495 dwAddressStates contains one or more bits that are not LINEADDRESSSTATE_ constants.
15496 The application handle specified in hLineApp is invalid or not recognized.
15497 The specified application name is invalid. If an application name is specified by the application, it is assumed that the string does not contain any non-displayable characters and is NULL-terminated.
15498 The specified bearer mode is not valid.
15499 The specified completion is not valid.
15500 The specified call handle is not valid.
15501 The specified call parameter structure is not valid.
15502 The specified call privilege parameter is not valid.
15503 The specified dwCallSelect parameter is not valid.
15504 The current state of the call does not allow the specified action.
15505 The specified call state list is not valid.
15506 The permanent card ID specified in dwCard could not be found in any entry in the [Cards] section of TELEPHON.INI.
15507 The completion ID is not valid.
15508 The specified call handle for the conference call is not valid, or is not a handle for a conference call.
15509 The specified consultation call handle is not valid.
15510 The specified country code is not valid.
15511 The specified line does not support the indicated device class.
15512 Invalid device handle.
15513 The specified digit list is invalid.
15514 The specified digit mode is not valid.
15515 The specified termination digits are not valid.
15516 The line API extension version is not valid.
15517 The specified group ID is not valid.
15518 The specified line handle is not valid.
15519 The line is currently not in a state in which this operation can be performed.
15520 The permanent location ID could not be found in any entry in the [Locations] section of TELEPHON.INI.
15521 The specified media list is not valid.
15522 The specified media mode parameter is not valid.
15523 The number given in dwMessageID is not within the range specified by the dwNumCompletionMessages field in the LINEADDRESSCAPS structure.
15524 The parameter is not valid.
15525 The specified park ID is not valid.
15526 The specified park mode is not valid.
15527 The pointer is not valid.
15528 The flag or combination of flags that was set for the dwPrivileges parameter is not valid.
15529 The specified bearer mode is not valid.
15530 The specified request mode is not valid.
15531 The specified terminal ID is not valid.
15532 The specified terminal mode is not valid.
15533 The specified timeout is not valid.
15534 The specified tone is not valid.
15535 The specified tone list is not valid.
15536 The specified tone mode is not valid.
15537 The specified transfer mode parameter is not valid.
15538 LINEMAPPER was the value passed in the dwDeviceID parameter, but no lines were found that match the requirements specified in the lpCallParams parameter.
15539 The specified call is not a conference call handle or a participant call.
15540 The line device has no associated device for the given device class.
15541 One of the telephone service provider components is missing or corrupt. Use the Telephony Control Panel to correct the problem.
15542 Insufficient memory to perform the operation.
15543 There currently is no request pending of the indicated mode, or the application is no longer the highest-priority application for the specified request mode.
15544 The application does not have owner privilege to the specified call.
15545 The application is not registered as a request recipient for the indicated request mode.
15546 The operation failed for unknown reasons.
15547 The operation is not available.
15548 The service provider currently does not have sufficient bandwidth for the specified rate.
15549 The operation cannot be completed because of resource overcommitment.
15550 Request Overrun Error
15551 The dwTotalSize field of the structure is smaller than the fixed size of the structure.
15552 A target for the call handoff was not found.
15553 The application invoking this operation is the target of the indirect handoff.
15554 The operation was invoked before any application called lineInitialize.
15555 The string containing user-to-user information exceeds the maximum number of bytes specified in the dwUUIMakeCallSize field of LINEDEVCAPS.
15556 TAPI reinitialization has been requested, so turn off the line device now.
15557 The specified address is blocked from being dialed on the specified call.
15558 Billing Rejected Error
15559 The dwFeature parameter is not valid.
15560 The current Telephony Service Provider does not support multiple instances but is listed more than once in the [Providers] section of TELEPHON.INI. Use the Telephony Control Panel to remove the duplicated driver.
15561 TAPI Line Initialization Error
15562 The specified phone resource is already allocated.
15563 The specified device ID is out of range.
15564 The application requested an API version that cannot be supported by the Telephony API implementation and/or corresponding service provider.
15565 The application requested an extension version that cannot be supported by the service provider.
15566 The TELEPHON.INI file was corrupted.
15567 The device is currently in use.
15568 The specified resource is already allocated.
15569 The specified application name is not valid. If an application name is specified by the application, it is assumed that the string does not contain any non-displayable characters and is NULL-terminated.
15570 The specified button/lamp ID is not valid.
15571 The button mode parameter is not valid.
15572 The button states parameter is not valid.
15573 The specified data ID is not valid.
15574 The specified phone does not support the indicated device class.
15575 Invalid phone API extension version.
15576 The switch hook device parameter is not valid.
15577 The switch hook mode parameter is not valid.
15578 The specified lamp mode parameter is not valid.
15579 The parameter is not valid.
15580 The specified device handle is not valid.
15581 The specified pointer parameter is not valid.
15582 One or more of the specified pointer parameters are not valid.
15583 The dwPrivilege parameter is not valid.
15584 The ring mode parameter is not valid.
15585 No drivers are listed in the TELEPHON.INI file. Use the Telephony Control Panel to install a Telephone Service Provider before running this application.
15586 One of the telephone service provider components is missing or corrupt. Use the Telephony Control Panel to correct the problem.
15587 Unable to allocate memory for phone device.
15588 The application does not have owner privilege to the specified phone device.
15589 The operation failed for unspecified reasons.
15590 The operation is unavailable.
15591 The operation cannot be completed because of resource overcommitment.
15592 Request Overrun Error
15593 The dwTotalSize field of the structure is smaller than the fixed size.
15594 The operation was invoked before any application called phoneInitialize.
15595 TAPI reinitialization has been requested. Turn off the phone device.
15596 Error loading TAPI.DLL
15598 Answering...
15601 Volume Control
15602 SNDVOL32.EXE
15603 WINFAX
15604 Fax Path
15605 WinFax PRO Audio Bar
15606 beep
15607 pause
15610 Num%d
15612 WFXVCUT_SliderNotify
15613 VOLUME
15614 POSITION
15615 SPEED
15616 Voice Message
15625 Symbol
15663 AudioBar Properties
15717 STARTUP
15718 GOODBYE
15719 WAVE_BYE
15720 faxsend
15721 FAXSTART
15722 FAXMODE
15723 play
15724 V\STARTFAX.
15725 faxmode
15726 GOODBYE_BODY
15727 V\GOODBYE.
15728 hangup
15729 ANNCTR.VMU
15730 STDCTR.VMU
15731 MSGCTR.VMU
15732 V\WINFAX.
15733 SUPER
15734 setsuperuser
15735 callmenu
15736 V\MAILBOX
15737 &Redial
15738 &Stop
15739 Pausing for retry...
15740 Modem error...
15742 Modem in use. Please wait.
15744 Modem controller failed... restart.
15746 No dial tone... disconnecting.
15748 Line busy... disconnecting.
15750 No answer... disconnecting.
15752 Cannot connect...
15754 Incoming call...
15756 On hold...
15758 Exiting...
15760 Incoming call from:
15761 &What's This?
15762 &Properties
15763 Telephone Properties
15764 Please enter numbers only.
15765 SOFTABORT
15766 Prompt
15767 Action
15768 Default
15769 Delay
15770 Retries
15771 Value
15772 Handsetdown
15773 EndOfList
15774 EmptyList
15775 Error
15776 Superuser
15777 Startup
15778 Button
15779 Handsetup
15780 Menu%02d
15782 TalkWorks Mailbox Wizard
15783 - The primary TalkWorks greeting will always be used.
15784 - The primary user greeting will always be used.
15785 exit
15787 The mailbox name cannot be blank.
15789 There cannot be a mailbox with this name. Select another mailbox name.
15790 A mailbox with this name already exists. Select another mailbox name.
15792 Receive Log
15794 Send Log
15796 Wastebasket
15812 GSM
15829 getmsg
15830 setlist
15831 updatemsg
15832 password
15833 capturedigits
15834 matchdigits
15835 noaction
15836 datarecv
15837 returnmenu
15838 setuser
15839 record
15840 boxid
15841 writeinifile
15842 description
15843 execute
15844 log
15845 telnumber
15846 winfaxback
15847 faxback
15848 bftback
15849 sendtones
15850 TalkWorks Greeting Wizard
15859 WFXVCAPP_MachineIdle
15860 Initializing...
15861 Receiving fax...
15862 Automated attendant running.
15863 V\
15890 TalkWorks Properties
15891 Linear
15892 Conserve Disk Space
15893 Best Voice Quality
15894 Standard Voice\n
15895 %s must be longer than %d seconds.
15896 Min Message Length
15897 Max Message Length
15898 The length of time you specified in the 'Stop recording messages after' field must be longer than the time after which you delete a message.